Product Presentation
GREEN EXPRESS Climate Change Vaccine is a certified organic product designed to restore biodiversity and rehabilitate affected environmental land. It inhibits and eliminates pathogenic microorganisms, including bacteria, viruses, and fungi, while protecting beneficial microbiological agents. The product is produced through co-cultivation of specific microorganisms and 10 plant supports in a bioreactor, which stimulates the innate immune system of plants and supports the production of proteins to neutralize harmful microbiological agents.
The production process includes seven stages: microorganism cultivation, inactivation, co-cultivation, protein extraction, sterilization, and packaging.
Advantages
- Pathogen Protection:
- Kills harmful microorganisms and protects beneficial ones.
- Provides primary antifungal, antiviral, and antibacterial protection, reducing the need for chemical treatments.
- Enhanced Root Development and Recovery:
- Stimulates the growth of root systems, enabling plant growth even in drought conditions.
- Increases plant metabolism and resilience in polluted or stressed environments.
- Stress Reduction:
- High amino acid content eliminates plant stress caused by drought, rainfall, or pollution.
- Improved Protein Synthesis:
- Enzymes improve protein synthesis, increasing crude protein content in plants by up to 8%.
Other Benefits
For Plants:
- Stronger root systems and accelerated budding.
- Enhanced flowering, fertility, and resistance to diseases.
- Increased fructose, protein, and vitamin content.
- Improved taste and transport resilience of products.
For Soil:
- Natural decompaction to depths over 60 cm.
- Improved phosphorus and microelement mobility.
- Reduced nitrate content.
- Enhanced pH regulation and nutrient bioavailability.
Agrochemical Analysis
| Indicator | Unit | Value | Reference Standard |
|---|---|---|---|
| pH (at 18.9°C) | Unit pH | 4.5 | SR EN ISO 10523: 2012 |
| Nitrogen Kjeldahl (NK) | mg/L | 135.0 | SR EN 25663: 2000 |
| Total Phosphorus (PT) | mg/L | 42.41 | SR EN ISO 11885: 2009 |
| Total Iron (FeT) | mg/L | 7.02 | |
| Potassium (K) | mg/L | 2624 | |
| Copper (Cu) | mg/L | 0.058 | |
| Manganese (Mn) | mg/L | 1.185 | |
| Zinc (Zn) | mg/L | 0.352 |
Product Composition:
- Organic Matter: 100% (derived from plants rich in essential nutrients).
- Amino Acids: 10% (naturally obtained).
- Humic Acids: High content.
- Conductivity: 3–5 mS/cm.
- Appearance: Light brown liquid.
- Density: 1 ml = 1 g.
- Solubility: 100% in water.
Method of Application
Treatment Scheme:
- Early Treatment:
- 5L of product mixed with 100L of water per hectare for zones affected by pollution.
- First Cycle:
- Apply 5L/100L per hectare after the first stage of pollution.
- Second Cycle:
- Apply 5L/100L per hectare after the second stage of pollution.
- Final Stage:
- Apply 5L/100L per hectare one month before waste removal from the affected zone.
Usage Instructions:
- Shake well before use.
- Dilution does not affect product quality; apply immediately after preparation.
- Ensure suitable spraying conditions (temperature, humidity, wind speed).
- Avoid mixing with antifungal, antiviral, or antibacterial products.
- Clean spray tanks thoroughly before use.
Safety Data Sheet
- Shake the container before use.
- Use water at a minimum temperature of 20°C for mixing.
- Store at temperatures between +5°C and +20°C.
- Keep out of reach of children, food, and drinks.
- Apply in recommended doses only.
Warning: Improper storage, handling, or application may reduce product effectiveness. Consult a specialist before large-scale use.
For inquiries, contact SC Elpida Research Inc. SRL at the provided address or email.
Reviews
There are no reviews yet.